About MoxaProductsSolutionsSupport & ServiceNews & EventsWhere to BuyPartner Zone

You are here: Home > News & Events > News > Press Release  
 
 

Moxa releases CN2610 terminal servers with dual LAN redundancy

Sep. 11, 2007

Taipei, Taiwan, September 11, 2007—Moxa has released the CN2610 terminal server, which provides dual LAN ports and a "Redundant COM” mode for robust network redundancy.

Dual LAN Redundancy
Redundancy is an important requirement for many industrial applications, and different solutions have been developed to keep systems running during equipment or software failure. Special "watchdog” hardware is required to implement hardware redundancy, and a "token" switching mechanism is required at the software level. Dual LAN redundancy involves two separate physical networks that connect a PC host to the terminal server. On the CN2610, the two networks are connected using two built-in LAN ports. On the PC host, two LAN cards will be required. When dual LAN redundancy is implemented, the PC host will have continuous access to serial devices attached to the CN2610, even if one of the networks fails.

Redundant COM
The CN2610's "Redundant COM" mode is specially designed for redundant LANs between serial devices and a host computer. Using the two built-in LAN ports on the CN2610, the host computer connects to the terminal server over two independent LANs. If one LAN fails, data will continue to be transmitted between the serial devices and the host using the other LAN. The main advantage of MOXA’s Redundant COM mode is that the LAN switchover happens instantly. Data transmission between the host and the serial devices will not be interrupted or delayed, even if one of the LANs fails.

Dual Host Redundancy
The CN2610 can also be used to set up "dual host” redundancy, in which two separate hosts connect to the serial devices over two separate networks. If there is a failure at one of the hosts, data will continue to be transmitted between the serial devices and the other host over the other LAN.

CN2610 Features

  • LCD control panel for easy on-site management
  • Dual LAN redundancy with two IP addresses and two MAC addresses
  • Redundant COM mode for two active network connections
  • Dual hosts redundancy
  • Real COM/TTY drivers for Window and Linux

 

About MOXA
MOXA manufactures device networking products for industrial automation. Information about all MOXA products, which include industrial embedded computers, industrial Ethernet switches, serial device servers, multiport serial cards, embedded device servers, and remote I/O servers, is available on MOXA's corporate website at 1g.moxa.com. You may also contact MOXA directly by email at info@moxa.com, or by phoning +886 (2) 8919-1230.


The MOXA logo is a registered trademark of the Moxa Group. All other trademarks mentioned in this document are the property of their respective owners.

 
 
Home | About Moxa | Products | Solutions | Support & Service | News & Events | Partner Zone | Where to Buy | Contact Moxa | Sitemap