| |
 |
IA261-I/IA262-I NEW!
RISC-based Industrial Ready-to-Run Embedded Computer with 2/4 Serial
Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CAN, CompactFlash, USB |
|
 |
Quickview |
 |
|
|
|
 |
 |
Reliable and industrial-grade design to meet IP40 demand |
|
DI/DO with 3 KV optical isolation protection |
|
2 CAN ports for CANOpen protocol |
|
| |
|
| |
|
Introduction |
|
|
| |
The IA261-I/262-I embedded computers come with 2 or 4 RS-232/422/485 serial ports, dual CANbus ports, dual Ethernet ports, 8 digital input channels, 8 digital output channels, VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, IP40 protected, industrial-strength aluminum case.
The IA261-I/262-I computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM give you enough memory to run your application software directly on the IA261-I/262-I.
The IA261-I/262-I computers support RS-232/422/485, CANbus, DI/O channels, and dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. Meanwhile, the IA261-I/262-I comes with 2 KV digital isolation protection for all serial ports and CAN ports, and 3 KV optical isolation protection for DI/O channels, ensuring a reliable system operation and data communication.
With its built-in VGA output interface, the IA261-I/262-I is suitable for use with SCADA systems in industrial applications, such as factory automation, production line process monitoring, and mining automation, that require VGA and HMI features.
The IA261-I/262-I computers come with Windows CE 6.0 pre-installed, and support general Windows and .NET 2.0 computing environments. This means that programs developed for standard PC operating systems with tools such Embedded Visual C++ or Visual Studio 2005 can run on the IA261/262 without much porting effort.
More
info >> |
|
 Back to Top |
|
Features |
|
|
|
 |
Cirrus Logic EP9315 ARM9 CPU, 200 MHz |
|
|
128 MB RAM on-board, 32 MB flash disk |
|
|
VGA interface for field site monitoring |
|
|
2 KV digitally isolated RS-232/422/485 serial ports |
|
|
Dual 10/100 Mbps Ethernet for network redundancy |
|
|
Dual 2 KV digitally isolated CAN ports with CANopen protocol support |
|
8+8 DI/DO with 3 KV optical isolation protection |
|
12 to 48 VDC redundant power input design |
|
Supports CompactFlash and USB 2.0 hosts |
|
Ready-to-run WinCE 6.0 platform |
|
-40 to 75°C wide temperature models available |
|
|
| |
Back
to Top
|
|
Hardware Specifications
|
|
|
|
| Computer |
|
|
|
| Cirrus EP9315 ARM9 CPU, 200 MHz |
|
|
|
|
|
|
|
| 128 MB onboard (optional 256 MB) |
|
|
|
|
|
|
|
|
|
|
| USB 2.0 host x 2, compliant with USB 2.0 (OHCI) type A connector |
|
|
|
|
|
|
|
| Supports "Reset to Factory Default" |
|
|
|
|
| |
| LAN Interface |
|
| Auto-sensing 10/100 Bmps x 2, RJ45 connectors |
|
|
| Magnetic Isolation Protection |
|
|
|
| |
| Serial Interface |
|
|
|
| RS-232/422/485, software-selectable |
|
|
|
|
|
|
| Digital Isolation Protection |
|
|
|
| RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1) |
|
|
|
| |
| Serial Communication Parameters |
|
|
|
|
|
|
| Non, Even, Odd, Space, Mark |
|
|
|
| RTS/CTS, XON/XOFFf, ADDC™ (automatic data direction control) for RS-485 |
|
|
|
| 50 bps to 921.6 Kbps (non-standard baudrates supported; see user' manual for details) |
|
|
|
| |
| Serial Signals |
|
| TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND |
|
|
|
| TxD+, TxD-, RxD+, RxD-, GND |
|
|
|
| TxD+, TxD-, RxD+, RxD-, GND |
|
|
|
|
|
| |
| CANbus Communication |
|
| Dual digitally isolated CAN2.0A/2.0B compliant ports (IA262-I only) |
|
|
|
|
|
|
|
|
| Digital Isolation Protection |
|
|
|
|
|
|
|
| |
|
Digitial Input |
|
|
|
|
| Digital Input Levels for Dry Contacts |
|
| Logic level 0: close to GND; Logic level 1: Open |
|
|
| Digital Input Levels for Wet Contacts |
|
| Logic level 0: +3V max; Logic level 1: +10V to +30V (COM TO DI) |
|
|
|
| 10-pin screw terminal block (8 points, COM, GND) |
|
|
| Optical Isolation Protection |
|
|
|
| |
| Digitial Output |
|
|
|
|
|
| 24 VDC nominal, open collector to 30V |
|
|
| Optical Isolation Protection |
|
|
|
| 9-pin screw terminal block |
|
|
|
| |
| Display |
|
EP9315 internal graphics accelerator engine with TTL graphical signal support |
|
|
|
| Dynamic video memory (shares system memory) |
|
|
|
|
|
| CRT interface for VGA output, DB15 female connector |
|
|
|
| |
| LEDs |
|
| Power x 1, Ready x 1, Storage x 1 |
|
|
|
| 10M/Link x 2, 100M/Link x 2 (on connector) |
|
|
|
TxD x 4, RxD x 4;
IA261-I: P1 to P4 for serial ports; IA262-I: P1 to P2 for serial ports, P3 to P4 for CAN ports |
|
|
|
| |
| Physical Characteristics |
|
Aluminum, industrial vertical form factor |
|
|
|
|
|
| 60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in) |
|
|
|
|
|
| |
| Environmental Limits |
|
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
|
|
|
|
|
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
|
|
|
| |
| Power Requirements |
|
Redundant power input design
PWR1: 12 to 48 VDC (3-pin terminal block)
PWR2: 12 to 48 VDC (power jack with thread) |
|
|
|
783 mA @ 12 VDC (with no load on USB ports)
1.2 A @ 12 VDC (with load on 2 USB ports) |
|
|
|
| |
| Regulatory Approvals |
|
| |
| Reliability |
|
| Built-in buzzer and RTC (real-time clock) |
|
|
|
| Built-in WDT (watchdog timer) |
|
|
|
| |
| Warranty |
|
| |
|
Software Specifications
|
|
|
|
| Windows Embedded CE 6.0 |
|
|
|
| Windows command shell, telnet, ftp, web-based administration manager |
|
|
|
|
|
|
|
| TCP, UDP, IPv4, SNMP, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, Telnet, FTP, PPP |
|
|
| Supporting Services and Daemons |
|
Telnet Server: Allows remote administration through a standard telnet client.
FTP Server: Used for transferring files to and from remote computer systems over a network.
Web Server (httpd): Includes ASP, ISAPI Secure Socket Layer support, SSL 2, SSL 3, and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions.
Dial-up Networking Service: RAS client API and PPP, supporting Extensible Authentication Protocol (EAP) and RAS scripting.
Watchdog Server: CPU hardware function for resetting the CPU in a user-specified time interval; activated by a Moxa library function |
|
|
| Application Development Environment |
|
Moxa WinCE 6.0 SDK
C Libraries and Run-times
Component Services (COM and DCOM)
Microsoft® .NET Compact Framework 2.0 with SP2
XML, including DOM, XQL, XPATH, XSLT, SAX
SOAP Toolkit
Winsock 2.2
CANopen library that conforms to DS301. V.4.02 |
|
|
|
|
| |
|
|
Ordering
Information
|
|
|
| Standard Operating Temperature Models (-10 to 60°C) |
|
 IA261-I-CE |
|
| RISC-based Industrial Ready-to-Run Embedded Computer with 4 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CompactFlash, USB, Windows CE 6.0 |
|
|
IA262-I-CE |
|
| RISC-based Industrial Ready-to-Run Embedded Computer with 2 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CAN, CompactFlash, USB, Windows CE 6.0 |
|
|
|
| |
|
|
• IA261-I or IA262-I computer
• Wall mounting kit
• DIN-Rail mounting kit
• Ethernet cable: RJ45 to RJ45 cross-over cable, 100 cm
• CBL-RJ45F9-150: 8-pin RJ45 to DB9 female console port cable, 150 cm
• CBL-RJ45M9-150: 8-pin RJ45 to DB9 male serial port cable, 150 cm
• Universal Power Adaptor
• Document and Software CD
• Quick Installation Guide (printed)
• Warranty Card |
|
|
|
|
|
|
