| |
 |
VPort 251 New!
Full motion, 1-channel MJPEG/MPEG4 Video Encoder
|
|
 |
Quickview |
 |
|
|
|
 |
 |
Compress analog video/audio signals into MJPEG/MPEG4 video stream |
|
Video stream up to 30 frames/sec at full D1 (720 x 480) resolution |
|
2-way (1 in, 1 out) audio supported |
|
Transparent PTZ Control for using legacy PTZ control panel or keyboard |
|
Loop-through power output for powering an analog camera |
|
Free VPort SDK PLUS and 4-channel video surveillance software |
|
| |
|
| |
|
Introduction |
|
|
| |
The VPort 251 is a high performance, 1-channel video encoder with compact form factor that is suitable for installation in a variety of locations, including outdoor camera cabinets. To make installation easier, the VPort 251 supports both panel mounting and DIN-Rail mounting (with DK-35A accessory), and 1 loop-through power output for powering an analog camera. In addition, the VPort 251 provides up to full D1, full frame rate video performance (NTSC: 720 x 480 up
to 30 FPS; PAL: 720 x 576 up to 25 FPS) and supports both MJPEG or MPEG4, making it especially well suited for use with distributed video surveillance systems. A 2-way audio function is also provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.
Video Networking Solutions >>
|
|
 Back to Top |
|
Features |
|
|
|
|
|
 |
High Performance Video/Audio Networking Solution |
| |
|
Works with NTSC/PAL analog video cameras |
| |
|
MJPEG/MPEG4 video compression technologyn |
| |
|
1 BNC video input |
| |
|
1 audio input and 1 audio output for 2-way voice communication |
| |
|
Standard RTSP (real-time streaming protocol) for easy integration |
| |
|
Multicast (IGMP) protocols for efficient network transmission |
| |
|
QoS (ToS) for setting video data priority in network traffic |
| |
|
Built-in web server and RS-232 console for remote access and configuration |
| |
|
1 auto-sensing 10/100BaseT(X) Ethernet port |
| |
|
TCP, UDP, and HTTP network transmission modes |
| |
|
Simultaneous access for up to 10 clients |
| |
|
Configure video quality for CBR (constant bit rate) or VBR (variable bit rate) |
| |
|
Full D1, 4CIF, VGA, CIF, and QVGA video resolutions supported |
| |
|
Timestamp and text overlay supported |
| |
|
1 RS-232/RS-422/RS-485 COM port for controlling a PTZ (PAN/TILT/ZOOM) motorized camera |
| |
|
Supports Transparent PTZ control for cameras controlled by legacy PTZ control panel or keyboard |
| |
|
DDNS, UPnP and IP filtering supported |
|
Intelligent Alarm Triggered Capability |
| |
|
Built-in 3-area selectable Video Motion Detection (VMD) |
| |
|
Equipped with 1 DI and 1 Relay (DO) for external sensor and alarm |
| |
|
Video loss alarm supported |
| |
|
Pre, trigger, and post alarm snapshot images provided |
| |
|
Sequential snapshot images supported |
| |
|
Messages with recorded video and snapshot images can be sent via FTP and email |
| |
|
HTTP action setting for alarm messages sent by HTTP event server |
| |
|
Alarm schedule setting capability |
|
Convenient Hardware Installation |
| |
|
Compact form factor suitable for most installation locations |
| |
|
Supports panel mounting and DIN-Rail mounting (with DK-35A accessory) |
| |
|
Supports 1 loop-through power output (power range same as power input) for powering an analog camera |
|
Video Management and Control |
| |
|
MOXA SoftDVR™ Lite IP Surveillance Software for viewing and recording bundled free |
| |
|
Free MOXA VPort SDK PLUS supported with flexible interface and sample codes for customized application or system integration
* Please go to Moxa's website to download the latest SDK version. |
|
|
|
|
Back
to Top
|
|
Specifications
|
|
|
|
| Video |
|
|
|
| MJPEG, MPEG4 (ISO/IEC 14496-2) |
|
|
|
| 1, BNC connector (1 Vpp, 75 ohms) |
|
|
|
|
|
| Video Resolution and FPS (frames per second) |
|
| QVGA: NTSC (320 x 240, Max. 30 FPS), PAL (320 x 288, Max. 25 FPS)
CIF: NTSC (352 x 240, Max. 30 FPS), PAL (352 x 288, Max. 25 FPS)
VGA: NTSC (640 x 480, Max. 30 FPS), PAL (640 x 576, Max. 25 FPS)
4CIF: NTSC (704 x 480, Max. 30 FPS), PAL (704 x 576, Max. 25 FPS)
QVGA: NTSC (720 x 480, Max. 30 FPS), PAL (720 x 576, Max. 25 FPS) |
|
|
|
| Adjustable image size and quality
Timestamp and text overlay |
|
|
|
|
| |
| Audio |
|
|
|
| 1 Line-in or Mic-in, 3.5 mm phone jack |
|
|
|
| 1 Line-out, 3.5 mm phone jack |
|
|
|
|
| |
| Network |
|
|
| TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, DDNS, SNMPv1/v2c/v3 |
|
|
|
| 1 RJ45 port, 10/100BaseT(X) auto negotiation |
|
|
|
|
| |
| Serial Port |
|
|
|
| 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps |
|
|
|
|
|
|
|
| |
| GPIO |
|
|
1, max. 8 mA
"High": +13V to +30V
"Low": -30V to +3V |
|
|
|
|
|
|
| |
| LED Indicators |
|
|
|
| Indicates if the system boots properly or not |
|
|
|
|
| Video input signal active |
|
|
|
| PTZ control signal active |
|
|
|
|
| |
| Physical Characteristics |
|
|
|
|
|
|
|
|
|
| Wall (Panel) mounting, DIN-Rail mounting (optional kit) |
|
|
|
|
| |
| Power Requirements |
|
|
| 12/24 VDC or 24 VAC power inputs |
|
|
|
| 2-pin terminal block connector for loop-through from power input |
|
|
|
|
|
|
|
| |
| Environmental Limits |
|
|
|
|
|
|
| -40 to 85°C (-40 to 185°F) |
|
|
| Ambient Relative Humidity |
|
| 5 to 95% (non-condensing) |
|
|
|
|
| |
| Regulatory Approvals |
|
|
| FCC Part 15, CISPR (EN55022) class A |
|
|
|
EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-12 (Oscillatory wave immunity), level 3 |
|
|
|
|
|
|
|
|
|
|
| |
| Warranty |
|
|
| |
| Alarm Features |
|
|
| Video motion detection with sensitivity tuning |
|
|
|
|
|
| Daily repeat timing schedule |
|
|
|
| JPEG snapshots for pre/trigger/post alarm images
|
|
|
|
| Automatic transfer of stored images via email or FTP with event triggered actions |
|
|
|
| HTTP Event Servers for setting customized alarm actions |
|
|
|
|
| |
| PAN/TILT/ZOOM |
|
|
| PTZ camera control through RS-232/422/485 |
|
|
|
| PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions) |
|
|
|
| Supports 10 custom commands for customized PTZ control |
|
|
| Supported Devices and Protocols |
|
| Pelco D, Pelco P, Dynacolor DynaDOME, Custom Camera |
|
|
|
| Support PTZ driver upload function |
|
|
|
| Transparent PTZ camera control for controlling the PTZ camera with legacy PTZ control panel or keyboard connected with a PC or VPort decoder |
|
|
|
|
| |
| Security |
|
|
| User level password protection
IP address filtering |
|
|
|
|
| |
| System Requirements |
|
|
| Pentium 4, 2.4 GHz or above
512 MB memory or above
Windows XP/2000 with SP2 or above
Internet Explorer 6.x or above
DirectX 9.0c or above |
|
|
|
|
| |
| Software Bundled Free |
|
|
| 1- to 4-ch IP Surveillance Software for viewing and recording |
|
|
|
Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer
* Please go to Moxa's website to download the latest SDK version. |
|
|
|
|
| |
| |
|
|
Ordering
Information
|
|
|
| |
 VPort 251 |
|
| 1-channel MJPEG/MPEG4 Video Encoder, 0 to 60°C |
|
|
|
| |
| Optional Accessories |
|
|
16-channel IP Surveillance Software for viewing and recording
* CD with SoftDVR™ Pro software and User's Manual |
|
|
| US Plug: 120 VAC, 60Hz, P/N: 1117000025100
GER Plug: 230 VAC, 50Hz, P/N: 1117000025200
UK Plug: 230 VAC, 50Hz, P/N: 1117000025400
JP Plug: 100 to 240 VAC, 50Hz/60Hz, P/N: 1117000022700 |
|
|
DK-35A |
|
| DIN-Rail Mounting Kit (35 mm) |
|
|
|
| |
|
|
|
