| |
 |
VPort 351
Full Motion, 1-channel MJPEG/MPEG4 Industrial Video Encoder
|
|
 |
Quickview |
 |
|
|
|
 |
 |
Industrial design with -40 to 75°C operating temperature and fiber optic Ethernet port |
|
Video stream up to 30 frames/sec at full D1 (720 x 480) resolution |
|
Pre/post-alarm video recording function for advanced surveillance |
|
2-way (1 in/1 out) audio supported |
|
Free VPort SDK PLUS and 4-channel video surveillance software |
|
| |
|
| |
|
Introduction |
|
|
| |
The VPort 351 is a high performance, 1-channel industrial video
encoder that provides up to full D1, full frame rate performance
(NTSC: 720 x 480 @ 30 FPS; PAL: 720 x 576 @ 25 FPS) and supports
a dual MJPEG/MPEG4 algorithm, making it especially well-suited
for use with distributed surveillance systems in critical industrial applications. In addition, a continuous pre/post event trigger video record function can help system administrators determine why an
alarm was triggered. The 2-way audio is provided for the convenience
of real-time communication between system administrators located at
the central site, and engineers in the field.
Rugged design for mission-critical industrial environments
The VPort 351 features built-in single mode or multi mode optical fiber Ethernet port, DIN-Rail Mounting, a 12/24 VDC and 24 VAC redundant power input, -40 to 75°C operating temperature (T model), and IP30 protection for industrial mission-critical applications. In addition, the VPort 351 has received important industrial and safety approvals, such as UL508, Class1, Div. 2 (Pending), making the VPort 351 well suited for transportation, utility, and manufacturing systems.
Transparent PTZ control for easy control of PTZ cameras
The VPort 351 adopts Moxa’s Real COM technology to implement
transparent communication for RS-232/422/485 PTZ control. The
benefit of this transparent PTZ control function is that it eliminates
the need to build a PTZ control driver into the VPort product, since
legacy PTZ control panels or keyboards can be used to control the PTZ
camera directly.
Video Networking Solutions >>
|
|
 Back to Top |
|
Features |
|
|
|
|
|
 |
High Performance Video/Audio Networking Solution |
| |
|
Can works with NTSC/PAL analog video cameras |
| |
|
MPEG4/MJPEG video compression technology |
| |
|
1 BNC video input and 1 BNC video output with 75Ω resistance |
| |
|
1 audio input and 1 audio output for 2-way voice communication |
| |
|
Standard RTSP (real-time streaming protocol) video streaming for easy integration |
| |
|
Multicast (IGMP) protocols for efficient network transmission |
| |
|
SNMPv1/v2c/v3 MIB-II for easy network management |
| |
|
QoS (ToS) for configuring the transmission priority of video streams |
| |
|
Built-in web server and RS-232 console for remote access and configuration |
| |
|
1 auto-sensing 10/100BaseT(X) Ethernet port or 100BaseFX (SC connector) |
| |
|
TCP, UDP, and HTTP network transmission modes |
| |
|
Simultaneous access for up to 10 clients |
| |
|
Configure video quality for CBR (constant bit rate) or VBR (variable bit rate) |
| |
|
Full D1, 4CIF, VGA, CIF, and QVGA video resolutions supported |
| |
|
Timestamp and text overlay supported |
| |
|
Support RS-232/RS-422/RS-485 COM port for controlling PTZ (PAN/TILT/ZOOM) motorized camera |
| |
|
UPnP, DDNS, and IP filtering supported |
|
Industrial Rugged Design |
| |
|
2 12/24 VDC and 24 VAC redundant power inputs with LED indicators |
| |
|
-40 to 75°C operating temperature for critical industrial environment (T models) |
| |
|
35 mm DIN-Rail mounting, or panel mounting (with optional kit) |
| |
|
IP30 form factor protection |
| |
|
Class 1, Div. 2 hazardous certification for critical environments (Pending) |
|
Intelligent Alarm Triggered Capability |
| |
|
Built-in Video Motion Detection (VMD) |
| |
|
Equipped with 2 DIs and 2 Relays (DO) for external sensors and alarms |
| |
|
Pre/post-alarm video recording function for advanced surveillance |
| |
|
Pre, trigger, and post alarm snapshot images provided |
| |
|
Sequential snapshot images supported |
| |
|
Messages with recorded video and snapshot images can be sent via FTP and Email |
| |
|
Alarm schedule setting capability |
|
Video Management and Control |
| |
|
MOXA SoftDVR™ Lite IP Surveillance Software for viewing and
recording bundled free |
| |
|
Free MOXA VPort SDK PLUS supported with flexible interface and sample codes for customized application or system integration
* Please go to Moxa's website to download the latest SDK version. |
|
|
|
|
| |
Back
to Top
|
|
Specifications
|
|
|
|
| Video |
|
|
|
| MJPEG, MPEG4 (ISO/IEC 14496-2) |
|
|
|
| 1, BNC connector (1.0 Vpp, 75 ohms) |
|
|
|
|
| 1, loop-through BNC connector |
|
|
|
|
| Video Resolution and FPS (frames per second) |
|
| QVGA: NTSC (320 x 240, Max. 30 FPS), PAL (320 x 288, Max. 25 FPS)
CIF: NTSC (352 x 240, Max. 30 FPS), PAL (352 x 288, Max. 25 FPS)
VGA: NTSC (640 x 480, Max. 30 FPS), PAL (640 x 576, Max. 25 FPS)
4CIF: NTSC (704 x 480, Max. 30 FPS), PAL (704 x 576, Max. 25 FPS)
Full D1: NTSC (720 x 480, Max. 30 FPS), PAL (720 x 576, Max. 25 FPS) |
|
|
|
| Adjustable image size and quality
Timestamp and text overlay |
|
|
|
|
| |
| Audio |
|
|
|
| 1 Line-in or MIC-in, 3.5 mm phone jack |
|
|
|
|
| 1 Line-out, 3.5 mm phone jack |
|
|
|
|
| |
| Network |
|
|
| TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS |
|
|
|
| 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX fiber port (Single/multi mode, SC connector) |
|
|
|
|
| |
| Serial Port |
|
|
|
| 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps |
|
|
|
|
|
|
|
| |
| GPIO |
|
|
2, max. 8 mA
"High": +13V to +30V
"Low": -30V to +3V |
|
|
|
|
|
|
| |
| LED Indicators |
|
|
|
| Indicates if the system boots properly or not |
|
|
|
|
|
|
|
|
| Can be configured to correspond to system alarm, power failure, video loss, or disconnected network |
|
|
|
| Video input signal active |
|
|
|
| Audio input signal in test mode |
|
|
|
|
| PTZ control signal active |
|
|
|
|
| |
| Physical Characteristics |
|
|
| IP30 protection, metal case |
|
|
|
|
|
|
|
|
|
|
| DIN-Rail mounting, wall mounting (optional kit) |
|
|
|
|
| |
| Power Requirements |
|
|
| 2 12/24 VDC or 24 VAC inputs for redundancy |
|
|
|
|
|
|
| |
| Environmental Limits |
|
|
|
0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for T model |
|
|
|
|
| -40 to 85°C (-40 to 185°F) |
|
|
| Ambient Relative Humidity |
|
| 5 to 95% (non-condensing) |
|
|
|
|
| |
| Regulatory Approvals |
|
|
|
|
|
UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending)
ATEX Class I, Zone 2, Ex nC IIC (Pending) |
|
|
|
| FCC Part 15, CISPR (EN55022) class A |
|
|
|
EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-12 (Oscillatory wave immunity), level 3 |
|
|
|
|
|
|
|
|
|
|
272,000 hrs
Database: MIL-HDBK-217F, GB 25˚C |
|
|
|
|
| |
| Warranty |
|
|
| |
| Alarm Features |
|
|
|
| Video motion detection with object size and sensitivity tuning |
|
|
|
|
| Daily repeat timing schedule |
|
|
|
|
| JPEG snapshots for pre/trigger/post alarm images
Pre/post alarm video recording capability with 9 MB memory |
|
|
|
| Automatic transfer of stored images via email or FTP with eventtriggered actions |
|
|
|
|
| HTTP Event Servers for setting customized alarm actions |
|
|
|
|
| |
| PAN/TILT/ZOOM |
|
|
| PTZ camera control through RS-232/422/485 |
|
|
|
| PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions) |
|
|
|
|
| 10 custom commands for customized PTZ control |
|
|
| Supported Devices and Protocols |
|
| Pelco D, Pelco P, Dynacolor DynaDome, Custom Camera |
|
|
|
| Transparent PTZ control for controlling the PTZ camera with legacy PTZ control panel or keyboard connected to a PC or VPort decoder |
|
|
|
|
| Support PTZ driver upload function |
|
|
|
|
| |
| Security |
|
|
|
| User level password protection
IP address filtering |
|
|
|
|
| |
| System Requirements |
|
|
| Pentium 4, 2.4 GHz or above
512 MB memory or above
Windows XP/2000 with SP2 or above
Internet Explorer 6.x or above
DirectX 9.0c or above |
|
|
|
|
| |
| Software Bundled Free |
|
|
| 1- to 4-channel IP surveillance software for viewing and recording |
|
|
|
Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer
* Please go to Moxa's website to download the latest SDK version. |
|
|
|
|
| |
| * Preliminary specifications—subject to be changed
without notice. |
| |
|
|
Ordering
Information
|
|
|
| |
 VPort 351 |
|
| 1-ch MJPEG/MPEG4 Industrial Video Encoder with 24 VDC power input, 0 to 60°C |
|
| VPort 351-M-SC |
|
| 1-ch MJPEG/MPEG4 Industrial Video Encoder with 24 VDC power input, 1 multi mode 100BaseFX ports, SC connector, 0 to 60°C |
|
| VPort 351-S-SC |
|
| 1-ch MJPEG/MPEG4 Industrial Video Encoder with 24 VDC power input, 1 single mode 100BaseFX ports, SC connector, 0 to 60°C |
|
| VPort 351-T |
|
| 1-ch MJPEG/MPEG4 Industrial Video Encoder with 24 VDC power input,
-40 to 75°C |
|
| VPort 351-M-SC-T |
|
| 1-ch MJPEG/MPEG4 Industrial Video Encoder with 24 VDC power input, 1 multi mode 100BaseFX ports, SC connector,
-40 to 75°C |
|
|
VPort 351-S-SC-T |
|
| 1-ch MJPEG/MPEG4 Industrial Video Encoder with 24 VDC power input, 1 single mode 100BaseFX ports, SC connector,
-40 to 75°C |
|
|
|
| |
| Optional Accessories |
|
|
| 16-channel IP surveillance software for viewing and recording |
|
|
| 45W/2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input |
|
|
| 75W/3.2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input |
|
|
| 120W/5A DIN-Rail 24 VDC Power Supply with 88 to 132 VAC/176 to 264 VAC input by switch |
|
| WK-46 |
|
|
|
|
| 4U-high 19" rack mounting kit |
|
|
|
| |
|
|
|
